Technical data

SERVICING
AND
MAINTENAN
CE
INSTRUCTIONS
_
CONDENSING WALL-HUNG BOILER – TG05A052.A0205
26
Parameter 3 setting: HEATING TEMPERATURE SETTING
To modify the Parameter value:
a. Put ON/OFF button
1
in OFF position ( );
b. Push pad 6 and 4 simultaneously and keep them pressed;
c. Put ON/OFF button
1
in ON position ( )and wait until the display shows - ;
d. Release pad
6
and
4
;
e. Keeping pad 5 pressed, press pad 6 and select parameter no. ;
f. Release service pad
5
; press and release service pad
5
;
g. The display will show the parameter value to be set or modified;
h. Press pad 6 or 4 to modify (increase or decrease) the parameter value STANDARD from 30 to 80°C,
REDUCED from 25 to 40°C ;
i. Press and release service pad
5
to confirm setting;
j. The display will show parameter no. ;
k. Position ON/OFF button
1
first in OFF position ( ) and back to ON position ( );
Parameter “
4
” setting: PUMP SETTING IN HEATING MODE
To modify the Parameter value:
a. Put ON/OFF button
1
in OFF position ( );
b. Push pad
6
and
4
simultaneously and keep them pressed;
c. Put ON/OFF button 1 in ON position (
)
and wait until the display shows - ;
d. Release pad
6
and
4
;
e. Keeping pad
5
pressed, press pad
6
and select parameter no. ;
f. Release service pad
5
; press and release service pad
5
;
g. The display will show the parameter value to be set or modified;
h. Press pad
6
or
4
to modify (increase or decrease) the parameter value STANDARD (pump overrun),
PERMANENT (pump ON all the time);
i. Press and release service pad
5
to confirm setting;
j. The display will show parameter no. ;
k. Position ON/OFF button
1
first in OFF position ( ) and back to ON position ( );
P
0
0
0
3
3
P
0
0
0
4
4