Owner`s manual

Owner’s Manual – Gas Storage
5
H3958 026271 Rev. A
Refer to the Data Label for correct gas
type. Gas piping should be connected
through the side of the case (see gure
below).
The plastic grommet must be installed
around the pipe and clipped into the
case.
The gas control is tted with a
RC½"/15mm socket. A union
connection should be used.
Gas pipe sizes should be in accordance
with AS5601/AG601.
WARNING
Under no circumstances must the
ue terminal cover be removed /
or dis-assembled from the water
heater, except by a fully qualied
and authorised person.
Damage to the water heater will
occur and warranty will be void.
Gas
Entry
Gas Connections