Owner`s manual

Owner’s Manual – Gas Storage
9
H3958 026271 Rev. A
Note: Pressure adjustments at gas
cylinder regulator should be conducted
as required to ensure correct supply
pressure to water heater as per
AS5601/AG601.
Ignition System (Spark Gap)
If there is no spark or the spark looks
weak, adjust as follows:
1. Check the gap between the spark
electrode and the pilot burner is 3 –
5mm and adjust as necessary.
2. Push the igniter button to test for a
spark.
Warning: Test the spark gap only where
there is no build up of gas.
Note: Instruct owner in water heater
operation before leaving.
Commissioning Adjustments