Manualshelf

Instructions / Assembly

ManualsBrandsRadiant Sauna ManualsHot Tubs & Home Saunas3-Person with 7 Low-EMF Carbon Heaters and Audio System Cedar Elite Infrared Sauna
12345678910
ASSEMBLY INSTRUCTIONS (CONT.)
6. Attach the FRONT DOOR PANEL in place by sliding it down against RIGHT FRONT PANEL to engage three
metal clips on side of door with three clips on side of RIGHT FRONT PANEL.
5. Place the RIGHT FRONT PANEL on the FLOOR in the same manner and buckle it to the RIGHT BACK PANEL.
6
4. Place the BENCH SUPPORT HEATER PANEL on the FLOOR as shown and plug the heater cord into one of
the back wall cords. Position the FLOOR HEATER PANEL on the FLOOR as shown and feed the power cord
through the slot in the bottom of the support panel and plug into other wall cord. Place the BENCH SEAT on top
of the bench support with wood strip over back wall lip and secure with 2” screws using pre-drilled holes in bench.
NOTE: now is a good time
to install door handle as
shown in step 12, so it will
be easier to open door after
assembly.