Full Product Manual
7. Attach two FRONT SIDE BENCH SUPPORTS to BENCH SUPPORT HEATER PANELS (SHORT) with
2” SCREWS. Attach each BENCH SEAT with 2” SCREWS.
9. Lift the ROOF above the sauna, feeding the control panel and heater cables through the
corresponding holes. Secure the ROOF to the sauna with 1-1/8” SCREWS. Connect the control
panel wires, antenna, color therapy light and heater plugs.
ASSEMBLY INSTRUCTIONS (CONT.)
8. Place the FRONT PANEL on front lip of the FLOOR and buckle it to the SIDE PANELS.
7