User`s manual

VAB700XD Series User’s Manual
3 INSTALLATION
3.1 Unpacking The Unit
Remove all materials from the packing box and confirm receipt of the
following:
- VAB700XD-T transmitter (Standalone, Rack mount, 1U)
- VAB700XD-R Optical Receiver (Standalone, Rack mount, 1U)
- A/C power cord/Power Cube.
- User’s manual.
In the unlikely event that anything is missing, contact your sales representative
or call Radiant Tech Support. If it becomes necessary to return the unit(s),
repackage the unit in its original box.
3.2 General Installation
Make sure that there is enough space to pull and connect the BNC video
source, BNC output cables and optical cables without stressing them beyond
the manufacturer’s limitation (minimums bend radius).
Install the VAB700XD stand alone units such that the environmental
specifications are not exceeded.
NOTE: Install the VAB700XD such that ventilation is present as this will
minimize the possibility of component failures and increase system reliability.
Radiant Communications Fiber Optic Baseband Video/Audio One Direction Page 9