User`s manual

VAB700XD Series User’s Manual
The VAB700XD Series is designed such that once the unit is powered on and the I/O
Connectors are attached, no periodic maintenance is required.
Refer to the following installation instructions for operating the VAB700XD Series.
1. Mount the VAB700XDT and install the power, video and audio connections
2. Measure the Optical Output power and verify that the power is the within
specifications for the applicable VAB700XD Series Model
3. Attach the fiber optic cable plant to the VAB700XDT’s optical port
4. Repeat Steps 1 through 3 for the VAB700XDR
5. Verify that the LLINK Indicator is illuminated GREEN.
6. Verify that the VIDEO LED Indicator is GREEN (assuming that a valid video source
is connected to the VAB700XDT)
7. Verify that an acceptable video picture is output from the VAB700XDR
8. Verify audio operation using a suitable audio test source and audio receiver
Once the VAB700XD System has passed the system check test, the system is available
for application objectives.
Radiant Communications Fiber Optic Baseband Video/Audio One Direction Page 16