User`s manual

VAB700XD Series User’s Manual
3.3.2 Rackmount Chassis
Slide the VAB700XD Rack mount Card into and empty slot. Push firmly to ensure that
the card is properly seated into the card slot.
The VAB700XD Rack mount Card is hot swappable and may be inserted or removed
when power is applied to the chassis.
When power is applied to the chassis, the PWR LED indicator on the VAB700XD Rack
mount Card will illuminate indicating that the card is powered on.
The chassis power supply is designed for operation over an AC input range of 90 VAC
to 240 VAC and input frequency from 47 Hz to 63 Hz and is equipped with a standard
IEC three prong power plug which will only fit a grounding type AC outlet.
Note: Do not defeat the purpose of the AC chassis grounding plug or equipment
damage may occur
VAB700XD Series Installed in 3U 19” EIA Chassis
Insert Rack Mount Card by Firmly Pushing Card until Card
Seats into Chassis Motherboard Connector
Radiant Communications Fiber Optic Baseband Video/Audio One Direction Page 11