Use and Care Manual

Step 3
Installing Brackets. (Use Wall Plugs (K) only if you are installing into drywall)
Top Mounting Pin Wheel Bracket (A).
(Flip screws 90° to mount inside).
Outside Mounting Pin Wheel Bracket (A). Outside Mounting Crank Bracket (B). Top Mounting Pin Wheel Bracket (B).
(Flip screws 90° to mount inside).
Step 4
Securing Sun Shade to the Crank Bracket (B).
Insert headrail, Crank Rail Connector (E) side, into the Crank Device (D).
SUN SHADE
CORDLESS WITH CRANK INSTALLATION INSTRUCTIONS
Outside Mounting
Top / Inside Mounting
Step 5
Securing Sun Shade to the Pin Wheel Bracket (A).
Insert headrail, Pin Wheel (C) side, into the Pin Wheel Bracket (A).
Outside Mounting
Top / Inside Mounting
Step 6
Attaching the Crank Handle (G) to the Crank Device (D).
Angle the Crank Handle (G) Head through the Crank Device (D) Hole.
Outside Mounting
Top / Inside Mounting
Step 7
Fold Up the Crank Handle (G).
This allows easier range of motion raising and lowering the Sun Shade.
Secure Wind Tie Down (F) for extra support in inclement weather.
Outside Mounting
Top / Inside Mounting
Wind Tie Down
For assistance with installation or missing parts, please call 1 [phone]
Pour obtenir de l’aide concernant l’installation ou des pièces manquantes, composez le 1(800) 860-1677
Para obtener ayuda con la instalación o si faltan piezas, comuníquese al 1 [phone]
www.hymaninc.com
Printed in China / Imprimé en Chine / Impreso en China 12.29.2016
Lewis Hyman Inc. | 860 East Sandhill Avenue • Carson, CA 90746 | 7950 Third Flag Parkway • Austell, GA 30168