Product Specs

Radiance Instruments Ltd.
PHONE: [phone]（EXT126） FAX: [phone]
PRODUCT SPECIFICATION
Product number：TMW012BT Product name: DishTemp Blue
version: V1.0
Product specification ：
1） IP66 water resistance, Dishwasher safe.
2） C / F exchange.
3） Maximum temperature display.
4） Bluetooth reading data.
SPECIFICATION:
Measuring range
-58 ~ 220 F /-50 ~ 104C
Temperature accuracy
±0.9℉/0.5℃ 32 ~ 212 F /0 ~ 100C
±1.8℉/1℃ other range
Display resolution
0.1
Temperature reading update
1 second
Wireless distance
About 95 feet (29 meters) (it depends the smart phone, open field)
Battery
3 volt battery, type CR2032 or equivalent
Battery life
About 40 hours
Display size
45(W) X 26.5(H) mm
Product size
127 () x 14(D) mm
Working temperature
32 ~ 194 F/0 ~ 90 C
OPERATION:
1. Unpack the unit.
2. Press [ ] button to turn on the unit. Press and hold the button for 3 seconds then release to turn off the unit.
3. If no use for long time, press [ ] button to turn off the unit for saving battery life.
Select temperature unit
Press [ ] and hold for 5 seconds to turn on the unit and change temperature unit.
Reset
Press [ ] and hold for greater than 15 seconds then release to reset the unit.
Temperature measurement
1. Place the unit into the dishwasher. Insure the steel probe touch the water well. After finished washing, the unit can
be recorded the maximum temperature and display.
2. Reset the maximum memory before use. Switch the unit off and turn on to reset the memory.
APP function
Can be used APP RDTTool to reading the current temperature and maximum temperature, reading the data record,
control the unit ON-OFF.
NOTE:
1. Clean the unit after used.
2. Do not expose thermometer to temperatures over 194F/90C or use in ovens, otherwise incorrect readings or
damage to the thermometer may result.
3. Make sure tightening up the screws after battery replacement otherwise it may affect the water resistant function.
ERROR SYMBOLS:
Symbol
Description
Action required
Low battery voltage
Replace the battery with the same type
LLL.L
1) Sensor open circuit
2) The reading is out of low range (-58F)
1) Return the thermometer for repair
2) Keep the measurement above low range
HHH.H
1) Sensor short circuit
2) The reading is out of high range (220F)
1) Return the thermometer for repair
2) Keep the measurement below high range