BONO MINI TECHNO CAL DATA Page RADIAL’ R161.022.000 ISSUE 9809C02 SERIES ES ® Strip the cable . ® Slide the clamp nut , the washer and the 'Prove gasket onto the cable . Slide clamp braid sleeve over braid . Fold back braid and trim off surplus braid . Trim back dielectric as shown . Stripping inch 0 0,059 Mount washer and rear insulator . Solder the pale inner conductor into center contact . Mount front insulator . Sower sub-assembly into the connector body . { recommended coupling torque 70.87 in.lb Hex.
