BONO MINI e = H.filll RADIAL TECHNICAL DATA Page 2/ 2 R161.220.000 ISSUE 9744P00 SERIES WA ® Strip the cable . Stripping inch 0. mm 5 Slide the clamp nut , the washer and the 'V'groove gasket onto the cable . Slide clamp braid sleeve over braid . Fold back braid and trim off surplus braid . Trim back dielectric as shown . Mount washer and rear insulator . Solder the cable inner conductor into center contact . Mount front insulator . Screw sub-assembly into the connector body .
