BONO MINI TECHNO CAL DATA Page RADIAL’ R161.157.000 ISSUE 9812J01 SERIES CLANSMAN Strip the cable . FETE Slide the clamp nut , the washer and the gasket onto the cable . Slide clamp braid sleeve over braid . Fold back braid and trim off surplus braid . Trim back Dielectric as shown . Stripping inch o 0.276] mm 3.5 [11.6 7 o Sc rev sub-assembly into the connector body . ( recommended coupling torque 13.27 inbox ) Solder center contact . Hex. : SOLDER Screw clamp nut into the body .
