BONO MINI TECHNO CAL DATA Page RADIAL’ LAMP BRIE CLAMP NUT MASHER 'V'GROOVE BASKET R161.006.000 ISSUE LIVE CENTER CONTACT BODY 0305C01 SERIES ES Strip the cable . Stripping inch 0,039 Slide the clamp nut , the washer and the 'V'groove gasket onto the cable . Slide clamp braid sleeve over braid . Fold back braid and trim off surplus braid . Trim back dielectric as shown . Solder the cable inner conductor into center contact . Sc rev sub-assembly into the connector body . ( recommended coupling torque 39.
