Datasheet

COMPONENTS
1 4
2 5
3
Ferrule
Body
Centre contact
Heatshrink sleeve
(option)
STRIPPING DIMENSIONS
Slide the heatshrink sleeve onto the cable (Option).
Slide the ferrule onto the cable.
Strip the cable.
Slide the centre contact on until it bottoms against the cable
dielectric.
Solder the centre contact.
Clean solder area.
Slide the ferrule over the braid.
Crimp the ferrule with crimping tool ( see connector TDS ).
Cut the excess of braid if necessary.
Slide the sleeve over the ferrule and heatshrink it in place
(Option).
1
3
2
6
Crimp 01 : Soldered contact
Fan the braid.
Slide the cable into the body until it bottoms against the
insulator.
1
1
1
1
2
1
2
2
RF interconnect solutions
e
a
c
b