Owner`s manual

True to the Music
Radial Engineering Loopbone Owner’s Manual
3
8. Tuner output
The tuner output is always on and lets you tune on the fly.
9. Power boost footswitch
This footswitch activates the Class-A power booster for up to
15dB of gain.
10. Input jack
This is where you connect your guitar signal to the Loopbone.
11. Effects loop 1 footswitch & LED
This footswitch toggles the No.1 effects loop in and out of the
signal path. A large LED is used so that you can clearly see
your effects loop status.
12. Effects loop 2 footswitch & LED
Toggles the No. 2 effects loop in and out of the signal path. A
large LED indicates loop status.
13. Output jack
This is where you connect the Loopbone to your amplifier.
14. Heavy duty steel enclosure
Like all Radial products, the Loopbone is made tough to last.
Go ahead and step on it!