Owner`s manual

True to the Music
Radial Engineering Loopbone Owner’s Manual
2
FEATURE SET
1. Power supply connection
The Loopbone comes with its own 15VDC power supply in a choice of
100V, 110V, 220V, and 240V models.
2. Slingshot remote output
This jack connects to the footswitch input on devices like amplifiers,
that have footswitch control.
3. Slingshot remote output assign switches
These three switches let you set up the Slingshot remote output to
work with virtually all types of amplifiers that have a footswitch input.
4. Effects loop-2 send & receive
The send jack connects to your effect input, and the receive jack
connects to your effect output.
5. Effects loop-1 send & receive
Same as the loop-1 send & receive jacks, but for loop-2.
6. Gain control
This recessed knob lets you set the amount of gain added when the
power boost is turned on.
7. Drag control
Used to correct the load of the guitar pickups. Lets you match the
tone of your guitar as if connected directly to your amplifier.