Owner`s manual

BASSBONE FEATURE SET
1. BOOST level control
Controls the amount of BOOST
from unity-gain (no boost) to
+8dB.
2. HIGH-MID-LOW EQ controls
Active EQ on channel-2 over-
rides amp EQ settings
Low +/-12dB @ 75 Hz,
Mid +/-10dB @ 470 Hz,
High +/-16dB @ 5.6 KHz.
3. BOOST ASSIGN switch
Assigns the BOOST footswitch to
boost, effect loop or both.
4. CH. 1 CONTOUR switch
Selects between flat & two EQ
contour curves on channel-1.
5. LEVEL-2 control
Adjusts input level for channel-2.
6. XLR GROUND switch
Lifts pin-1 on XLR out to reduce
hum caused by ground-loops.
7. LEVEL-1 control
Adjusts input level for channel-1.
8. BAL. OUT
Balanced XLR output sends
‘post’ Bassbone sound to mixing
console.
Radial Engineering Bassbone Owner’s Manual
9. IN-2 jack
Alternate input for second bass.
Connects to channel 2.
10. IN-1 jack
Primary input is used for
the main bass. Connects to
channel 1.
11. INPUT TOGGLE footswitch
Selects between input 1 or 2.
Features bright, easy to see
large LED’s.
12. BOOST footswitch
Activates power boost and/or
effects loop with easy to see
large LED.
13. OUTPUT jack
Connects to your bass amplifier.
14. LOOP jack
Bassbones effects loop uses
standard TRS ¼” (tip-send, ring
return) insert-jack to connect
pedals.
15. TUNER output jack
High output band-pass filtered
output specifically EQ’d for
tuners.
16. External power supply.
15VCD (400mA) PSU jack.
3
True to the Music
8
71
4
32
13
14
15
16
6
5
9
10
1112