User guide

True to the Music

Radial Engineering Ltd. PZ-DI mkII

POWERING UP

Always make sure levels are turned off before making connections.

This will help eliminate turn-on transients that can harm more sensitive

components such as tweeters. You should also test at low volumes

before turning up.

The PZ-DI does not require a battery or power supply to make it work. It

uses 48V phantom from the mixing console. All you do is plug it in, turn

the phantom power on at the mixing desk and the power LED on the

PZ-DI will illuminate to let you know you are set to go.

Set the functions to the start position as follows:

The +48V LED will illuminate when

phantom power is present.

PAD

10M

220K

-15dB

OFF

MAX

LOAD

FILTER

3kHz

HI CUT

SELECT

LO CUT

OUT OUT

LOAD: Set the load switch to match the type of pickup or instrument

you are using.

PAD: Set to the outward position to start. Depress to engage the PAD

if you detect clipping. High output sources like digital keyboards

and active basses are more likely to cause clipping.

LO CUT: Start with the control turned fully counter-clockwise to the OFF

(bypass) position.

HI CUT: Set to the outward position to bypass the high frequcency ﬁ lter.