User guide

PZ-Deluxe™

True to the Music

Radial Engineering Ltd.

FEATURE SET

9. MUTE: Footswitch mutes the ¼” stage amp OUTPUT and LOW-Z DI OUT to allow

silent on-stage tuning and instrument changes.

10. AMP OUT: Separate ¼” guitar amp output is used to feed the artist’s on-stage ampliﬁ er

or in-ear monitoring system.

11. TUNER OUT: Separately buffered tuner output is always on to allow on the ﬂ y adjust-

ments.

12. LIFT: Lifts pin-1 (ground) on the XLR output to help eliminate hum and buzz caused by

ground loops.

13. 180° (DI OUT): Phase inverter reverses the polarity of the signal going to the PA sys-

tem to help eliminate acoustic hot-spots on stage that can cause feedback.

14. 180° (AMP OUTPUT): Phase inverter reverses the polarity of the signal going to the ¼”

stage amp OUTPUT and DI-OUT to help eliminate acoustic hot-spots on stage that can

cause feedback.

15. LO-CUT FILTER: Three position high-pass ﬁ lter cuts low frequencies to reduce reso-

nance which can often cause feedback on stage.

12 13 14 15