User manual

Do not attempt yourself to dismantle or to fix the
device.
Do not place the unit in a microwave and do not carry
out any monitoring with ionizers and ozonizers turned on.
Do not let particles penetrate through a perforated
hole inside the unit.
Do not touch electrical links of a battery block. It can
cause corrosion of links and affect normal functioning.
Condensate can occur on internal parts of device in
case of a rapid temperature difference from higher to
lower level. To prevent it place the device inside a plastic
bag. Keep it there till its temperature reaches one of the
environment.
In order to prevent damages to the unit do not use it if a
condensate has appeared. In this case extract power
batteries from unit and wait for a while till a condensate
evaporates. It is possible to use the device only after a
complete vaporization of a condensate.
Extract power batteries if the device is not being used
for a long time and keep the unit in dry and cool
conditions.
It is not recommended to keep the unit in places like
labs where chemical agents potentially may cause
corrosion.
It is necessary to check working capacity of the unit
before usage if it was kept in stowage for a long time.
6