User manual

Safety Precautions
Read the safety instructions carefully before using the device.
Follow the applicable safety instructions listed below. Heed all
warning.
• Do not leave the device for a long time under the
impact of a direct solar light or height temperature, for
example on an instrument board or in a trunk. The
impact of the sunlight or temperature can lead to
electrolyte leakage from power supply, their
overheating or explosion and therefore to arson, burn
and other injuries. High temperature can also cause
malformation of the device’s frame.
• Do not leave the device in damp and dusty
places. It can cause arson, electrical shock and other
damages.
• Protect the unit from shocks and heavy
mechanical stress that can cause damages of the
device.
• The unit is an accurate device. Avoid its fall and
other mechanical stresses.
• The body of the device is not waterproof;
therefore it can’t be exposed to raining or water. If the
device comes in touch with water, it is necessary to
switch it off and apply to QUARTA-RAD Ltd. In case a
small amount of water gets on the device or salty air,
wipe it with a soft tissue, place it in a warm and dry
premise and wait until a complete dehumidification
from the interior of the unit.
• Keep the unit away from devices such as
electric or magnetic motors, which generate strong
magnetic fields. Do not use and put the monitor close
to areas where high electromagnetic signals are
generated, such as transmitting tower. Superhigh
frequencies can lead to malfunctioning.
5