User manual

Marking and sealing
On the frame of the device are marked:
trade mark of the manufacturer;
trade mark - RADEX.
Conventional designation of the monitor- RD1503+
appears on display at its turning on.
The assembly number of the device is on the main menu
screen. The device is not sealed up by the manufacturer.
Packing
Packing ensures the safety of the device during the
transportation.
The packing of device must be carried out in closed
aerated premises at the temperature from +15 to +40°C and
humidity up to 80 %, and without aggressive admixtures and
dash in environment.
Transportation and storage
The device in the manufacturer's packaging may be
transported by any transport on any distance.
At transportation of the device it is necessary to ensure its
protection from the atmospheric precipitates.
The conditions of transportation of the device in the
package must correspond to:
temperature span,.............................. from -20 to +40 °C
relative humidity at +25 °C, no more than.................80%
Before putting the device into operation it should be kept in
the warehouse in a package of the manufacturer at
temperature of from +5 to +40 °C and RH up to 80 % at
temperature of +25 °C. It is not allowed to keep the device
without packing.
The device at temperature below 0 °C before opening and
putting into operation should be kept for an hour in the premise
at a room temperature.
38
-
-