User manual

Menu mode
In «MENU» mode one can alter unit measures, arrange a
magnitude of a threshold signal, turn on/off alarm and a vibra-
call, enable a «BACKGROUND» mode and also receive
reference information.
Switch to a «MENU» mode ceases monitoring of a
radiation dose rate.
In order to switch from «OBSERVATION» mode to a
«MENU» mode press and release a «MENU» button (page 8).
A main menu displays on the screen.
At start the icon « » is always situated on the upper line of
the menu, like in case of «UNIT» section.
Note. On figure a pointer « » demonstrates what
button is necessary to click in order to switch from the present
screen to the following one.
«CURSOR» button shown as « » on the screen moves
the pointer in a «MENU» mode. Clicking the button « »
moves the cursor down only. After reaching the lowest position
it transfers to the upper line.
Choosing the section needed of the menu is implemented
by a «SELECT» button. To return to the previous section press
a «RETURN» button.
Switching from «MENU» to «MONITORING» modes is
implemented by clicking an «EXIT» button. Such switching to
a «MONITORING» mode causes the estimation of a radiation
dose rate to start from the first cycle.
All individual settings are saved after turning off as well.
15