User manual

Results are saved to memory during the powerdown cycle.
Recording Interval Maximum recording time
1 minute 3 hours
5 minutes 15 hours
10 minutes 30 hours
30 minutes 90 hours
1 hour 180 hours
2 hours 15 days
4 hours 30 days
6 hours 45 days
12 hours 90 days
24 hours 180 days
Measurement results can be transferred to PC.
Turning On data collection function
1. Select menu
monitoring.
2. Move to on position and press .
Turning OFF data collection function
1. Select menu monitoring.
2. Move to off position and press .
Device appearance
Device operation
Miscellaneous
RADEX RD1212
User Guide
7
SETUP
Threshold
This function allows to set dose power level value which
will trigger an alarm (Audible or Vibration).
Turning ON Alarm function
1. Select menu levels.
2. Move to on position and press .
Turning OFF Alarm function
1. Select menu levels.
2. Move to off position and press .
Setting threshold level to trigger an alarm
1. Select
menu
levels.
2. Move to a numerical value and press .
3. By pressing or set desired value and press .
Data collection
This function allows to store in the device memory results
measured at pre-set intervals, as assigned by the user.
Data memory allocated to data recording function is
limited. Newer results will overlay older results. Increasing
the Recording Interval increases the number of data points
that can be stored in memory.