User manual
Measurement with allowance for background
Duringmeasurementwithallowanceforbackgroundtwo
valuesforeachtypeofradiationwillshowonthedisplay.
• forgamma-rayradiation-excessofthedoserateover
thebackgrounddoserateandvalueofthebackground
doserate;
• forbeta-rayradiation-excessofuxdensityoverthe
backgrounduxdensityandvalueofthebackground
uxdensity.
GAMMA
BETA
MENU
OFF
BKG
BKG
Search
When this function is enabled, the aggregate
measurement of gamma-ray and beta-ray radiation
measurementisperformed.
SEARCH
MENU
OFF
BKG
a
a.Doserate
Search with allowance for background
Whenthisfunctionisenabled,theaggregatemeasurement
of gamma-ray and beta-ray radiation measurement is
performed.
SEARCH
MENU
OFF
BKG
a
b
a.excessofcurrentdoserateoverthebackgrounddoserate
b.backgrounddoserate
Dose
When this function is enabled, the aggregate count
of gamma-ray and beta-ray measurement is performed,
as well as of the time period during which it has been
accumulated.
The device provides the possibility to accumulate and
storedosesfortwoindependentusers.
DOSE 1DOSE 1
MONTHS: 0
DAYS: 0
HORS: 0
RESETRESET
DOSE
µSv
Please be advised that the measurement results
obtained with the use of this device should NOT be
relied upon as ofcial and conclusive. No ofcial
government body has approved the use of this device.
RECOMMENDATIONS ON ANALYSIS OF OBJECTS
Analysis of radio-contamination of food products,
household items etc.
1. Measureradiationbackground(notlessthan10cycles)
at the distance of several meters from the object of
analysis.
2. Bringtheswitched-ondeviceveryclosetotheobjectof
analysis.Measuredoserate(notlessthan10cycles).
3. Compare results of measurements. If the value of the
secondmeasurementexceedstherstmeasurementby
more than 1,5 times, the object of analysis has radio-
contamination.
Search for the place of location of radiation source
1. Disablethethresholdfunction.
2. Enabletheacousticand/orvibrationsignalfunction.
3. Move the device in the supposed place of location of
radiationsource.Makeattentionnotonlytothereadings
ofmeasurements,buttothe frequency of signals.The
frequencyofsignalswillincreasewithapproachingthe
sourceanddecreasewithdistancingfromthesource.
TECHNICAL CHARACTERISTICS
Doseratemeasurementrange mсSv/h from0,1to999
Fluxdensitymeasurementrange 1/(см2*min) from6to999
Dosemeasurementrange mсSv from0,01to999
Rangeofenergiesofregistered:
• photonionizingradiation
• beta-rayradiation
MeV from0,05to3,0
from0,5to3,5
Error:
•fordoserate,notmorethan,
where Н – dose rate in mcSv/h ist.
• foruxdensity,notmorethan,
where Р – ux density, 1/cm2*min.
• fordose,notmorethan
%
±(15+3/H)
±(20+200/Р)
±15
Rangeofacousticalarmthresholds
•fordoserate
•foruxdensity
mсSv/h
1/(см2*min)
from0,2to1,2
from10to120
Measurementtime:
•fordoserate
•foruxdensity
sec
21
21
Powersupply:batterytype«АА» pc 1
Periodofcontinuousoperation h 950*
Dimensionsofdevice
heightхwidthхdepth
mm 140x64x26
Massofdevice(withoutbatteries) kg 0,175
*Atfactorysettingsofdevice,inconditionsofnaturalbackground
radiation.
Factory settings: Mode – «MEASUREMENT», Dose rate
threshold – «0,30 mcSv/h», Flux density threshold –
«101/сm2*min»,Background–«OFF»,Settings:acousticsignal
–«SILENCE»,Vibrationsignal–«OFF»,dose–«OFF».
5 6
7 8