Instructions

7.1 Intended use

Only use the RolloTron Basic DuoFern 1200 for opening

and closing roller shutters with a permissible belt.

Mechanical locks of any kind are not suitable

for automated operation with this device.

Only use original spare parts from RADEMACHER.

◆ By doing so, you avoid the risk of malfunctions and

damage to your RolloTron Basic DuoFern 1200.

◆ As the manufacturer, we provide no guarantee for the

use of third-party components and accept no liability

for consequential damage resulting from such.

◆ All repairs to the RolloTron Basic DuoFern 1200

must be undertaken by authorised customer service

personnel.

Operating conditions

◆ Only operate the RolloTron Basic DuoFern 1200 in

dry rooms.

◆ A 230 V / 50 Hz power supply, together with a site-

provided isolating device (fuse, MCB), must be per-

manently available at the installation location.

◆ An easily accessible 230 V / 50 Hz socket must be

available at the installation site if the enclosed con-

necting cable with Euro plug is being used.

◆ The roller shutters must run up and down smoothly

and should not stick.

◆ The mounting surface for the RolloTron Basic

DuoFern 1200 must be ﬂat.

◆ The installation and operation of the RolloTron Basic

DuoFern 1200 is only permitted for those systems

and devices where a malfunction in the transmitter

or receiver would not cause a danger to personnel

or property or where this risk is already covered by

other safety equipment.

Radio systems which transmit on the same

frequency can cause interference.