Instructions

50
EN
18. Removing the belt in the event of unit failure
In the event that the superrollo GW250 / GW255 unit
fails and the motor no longer runs, you can use the
disengaging bracket provided in order to fully remove
the belt from the belt winder unit, without the need
for cutting it.
1. Remove the mains plug from
the socket.
i
3. Release the drive with the help of the supplied
disengaging bracket. A small amount of resistance
must be overcome when pressing.
WARNING!
There is a risk of injury as the roller shutters may
slam shut or fall in an uncontrolled manner.
◆ Secure the roller shutters from falling.
◆ Hold on to the belt tightly to stop the roller shutters
from slamming shut or falling in an uncontrolled
manner.
◆ Get a second person to help you unlatch the unit.
2. Dismantle the superrollo GW250 / GW255 as
previously demonstrated on page 48.
Drive release
Storage bay
superrollo GW250