Instructions

48
EN
17. Removing the superrollo GW250 / GW255 (e.g. in the event of a move)
1. Remove the cover plate from the lower assembly
screws and setting buttons.
2.
M
+
OK
+
+
+
-
Erase all settings. Simultaneously press and hold
the buttons for 4 seconds.
3. Fully close the roller shutters.
4. Continue to press and hold the down button.
5. In doing so, pull out the belt as far as possible from
the top of the superrollo GW250 / GW255.
6. Remove the mains plug from
the socket.
i
7. Subsequently release the fastening screws and pull
the superrollo GW250 / GW255 completely out of
the belt box.