Instructions

43
EN
15.4 Setting the automatic solar function
Automatic lowering
If the sensor detects uninterrupted sunlight for
10 minutes, the shutter will descend until its shadow
covers the light sensor.
10 mins
sun
Automatic clearing
After approx. 20 minutes, the roller shutter is
automatically raised a small amount to uncover the
sensor. If the sun continues to shine, then the roller
shutter remains in this position. If the brightness
decreases below the set limit, it returns to the upper
end point.
i
The above-mentioned delay times can be
exceeded in the event of changing weather
conditions.
After 20
mins