Instructions

15.4 Setting the automatic solar function

The automatic solar function enables brightness-

dependent control of the roller shutters in combination

with the light sensor. To do this, the light sensor is secured

to the window pane with a suction cup and then plugged

into the superrollo GW250 / GW255.

Automatic solar function

Automatic moving up and down of the roller shutter

once a set limit is exceeded. The roller shutter end posi-

tion can be freely selected by changing the light sensor

position.

Example installation

Please note the state of the sun icon on the

standard display.

◆ During the activated automatic solar

function, the corresponding icon ashes

in the standard display as soon as sunlight

is detected.

◆ By setting the automatic solar function,

the automatic mode is automatically

switched on.

The automatic solar function will be terminated

and must be reactivated if required after the

following events:

◆ After manual actuation.

◆ After execution of an automatic function.

◆ After the upper end point is reached.