Instructions

34
EN
i
13. Initial commissioning with the help of the installation wizard
7. Set the lower end point.
7.1 Press and hold the Down button.
The roller shutter travels down.
7.2 Release the Down button, as soon as the
roller shutter reaches the desired position
for the lower end point.
The roller shutter stops.
7.3 / If necessary, the lower end point can
be corrected once more.
7.4
OK
Save the lower end point.
8. The standard display is shown as soon
as the nal setting is conrmed.
The superrollo GW250 / GW255 is now
ready for operation.
i
After a period of time it may be necessary to
recongure the end points as the belt may
elongate during the process of operation, see
page 45.