Instructions
31
EN
i
13. Initial commissioning with the help of the installation wizard
The wizard automatically guides you through the
conguration process for initial commissioning or after
a software reset (see page 47).
With the help of the installation wizard you will be
guided through the rst basic settings.
i
Following power failure, the installation
wizard will be started with the resetting of
the date and time.
Restart the installation wizard
As long as the installation wizard is still running,
it can be restarted by pressing the menu button.
Readiness for operation
The superrollo GW250 / GW255 is ready for use
as soon as the installation wizard has nished.
In the main menu you can change your settings
at any time, or add additional settings.
Additional information about conguring the end
points
The end points must be congured for the roller shutters
to stop at the desired upper and lower positions.
It is imperative that both end points are congured,
otherwise malfunctions may occur.
i
If the superrollo GW250 / GW255 is operated
without an end point setting, the drive will
continue to run as long as one of the two
control buttons is actuated.
The automatic functions remain blocked
until the end point setting is congured.