Instructions

29
EN
11. Mounting the superrollo GW250 / GW255
i
2. Mount the light sensor (not included, see page 58,
Accessories).
◆ Insert the light sensor plug into the designated
connection socket on the bottom of the
superrollo GW250 / GW255.
◆ Subsequently secure the light sensor to the
window pane using the suction cup.
i
The position of the light sensor on the window
pane determines the point at which the roller
shutters will close to in the event of sunlight.
3. Re-insert the mains plug into the 230 V / 50 Hz socket.
i
Leave the bottom cover plate open until all
settings have been carried out.