Instructions

28
EN
11. Mounting the superrollo GW250 / GW255
Mount the superrollo GW250 / GW255 as straight as
possible, so that the belt can wind correctly.
Ensure that the superrollo GW250 / GW255 sits freely in
the belt box and that it isn't in contact with the masonry,
otherwise noise will be generated during operation.
1. Slide the superrollo GW250 / GW255 into the belt box
and screw it tight using the screws provided.
WARNING!
A damaged connecting cable may cause a short
circuit.
Ensure that the connecting cable is laid correctly inside
the cable duct, otherwise it can be crushed and damaged
when the cover is screwed in place.
i