Instructions

4. Next, draw-in the belt into the superrollo

GW250 / GW255 from the top.

Feed the belt into the device, as shown in the image,

and slide it over the fastening hooks from above.

5. Re-insert the mains plug into the socket.

6. Press the up button until the belt has fully

wound once around the reel.

7. Pull the belt tight when winding, so that the deection

roller turns at the same time.

8. Remove the mains plug again from the socket.

9. Finally, place the provided reel compartment cover

onto the reel compartment.

Pull the belt over the fastening

hooks

10. Drawing in and fastening the belt

Reel compartment

cover

Belt path

in the device