Instructions

Operating conditions

◆ Only operate the superrollo GW250 / GW255

in dry rooms.

◆ A 230 V / 50 Hz power supply, together with a

site-provided isolating device (fuse, MCB), must be

permanently available at the installation location.

Using the superrollo GW250 / GW255 for purposes other

than previously mentioned is impermissible.

7.2 Improper use

7.1 Intended use

◆ An easily accessible 230 V / 50 Hz socket must be

available at the installation site if the enclosed

connecting cable with Euro plug is being used.

◆ The roller shutters must run up and down smoothly

and should not stick.

◆ The mounting surface for the superrollo

GW250 / GW255 must be at.

There is a risk to life caused through short circuiting

and electric shocks if the superrollo GW250 / GW255

is used outside.

◆ Never install or operate the superrollo

GW250 / GW255 outside.

7.3 Required expert knowledge of the installer

The electrical connection, installation and

commissioning of the superrollo GW250 / GW255 must

only be carried out by a qualied electrician in

accordance with the instructions in this manual.