Instructions

19
EN
7. Safety instructions
According to DIN EN 13659, it is necessary to determine
that the movement conditions for the shutters are main-
tained in accordance with EN 12045.
◆ The displacement must be of at least 40 mm on the
lower edge in the rolled-out position with a force
of 150 N in the upwards direction.
◆ In doing so, it must be ensured that the extend-
ing speed of the shutters for the nal 0.4 m is less
than 0.15 m/s.
i
7.1 Intended use
Only use the superrollo GW250 / GW255 for opening and
closing at roller shutters with a permissible belt.
Only use the manufacturer's original spare parts.
◆ By doing so, you avoid risk of malfunctions and
damage to your superrollo GW250 / GW255.
◆ As the manufacturer, we provide no guarantee for
the use of third-party components and accept
no liability for consequential damage resulting
from such.
◆ All repairs to the superrollo GW250 / GW255 must
be undertaken by authorised customer service
personnel.
i
i
Mechanical locks of any kind are not suitable
for automated operation with this device.
◆ If the running time limit is triggered, then the
superrollo GW250 / GW255 must be left for
at least 12 minutes to cool down.
i
During the cooling period the superrollo
GW250 / GW255 may not be used and the
temperature is displayed for as long as is
necessary.
◆ Full operational availability is re-established after
approx. one hour.