Instructions

86
EN
16.5 Menu 9.7.2 - Setting the sensor offset
The temperature measured on site can vary from the room
temperature if the DuoFern Room Thermostat 2 is installed in a
unfavourable position (e.g. behind a curtain or on a cool exterior
wall).
Setting range
An adjustment of the measurement in the range of - 5°C to + 5 °C
can be carried out using the sensor offset. The setting is under-
taken in steps of 0.1°C.
1. Open menu 9.7.2.
2. Set the offset for the internal
temperature sensor.
e.g. -1.5 °C
3. Set the offset for the external
temperature sensor.
e.g. 0.5 °C
OFFSET