Instructions

Table Of Contents
111
EN
18.4
Menu 9.9.4 - Switching the weather
data on/off
The DuoFern Room Thermostat 2 can receive and display
weather data (temperature, brightness, wind velocity and rain)
from a DuoFern Environmental Sensor. It is not necessary to log
the DuoFern Environmental Sensor on to the DuoFern Room
Thermostat 2.
The weather data can be called up and displayed directly on the
standard display, see page 55.
Maximum number of environmental sensors
A maximum of 4 environmental sensors are detected
Only one sensor can ever be selected as the source
Observing delays in displaying the weather data
i
Environmental sensors update the weather data
approx. every 5 minutes and therefore it can take a
few minutes for the weather data to be displayed
after the settings are configured.
This also applies after a power failure.
If no new weather data is received for
45 minutes, this is no longer available.