Instructions

55
EN
10.3 Take measurements
1. Measure up and mark the centre of the door.
Mark the centre of the door, as shown, on the upper
edge of the door, on the door lintel and on the garage
ceiling.
2. Determine the distance between the top edge
of the door and the ceiling.
Close the door slowly and measure the distance be-
tween the top edge of the door and the ceiling.
NOTE!
The minimum distance should be 4 cm.
3. Installation advice for fitting to sectional doors.
If the garage door drive is being used for a sectional
door, then the guide roller of the upper door segment
must be in the bend of the guide rail when the door
is closed.
Swing door
min. 4 cm
Sectional
door
Correct Wrong
min. 4 cm