Instructions

43
i
EN
Contents
i Dear Customer, ...............................42
1. Scope of delivery ...............................44
2. General view ...............................45
3. Key to symbols ............................... 46
4. Safety information ............................... 46
5. Proper use ...............................47
5.1 Operating conditions ..........................48
6. Improper use ............................... 48
7. Approved garage door types .......................... 49
7.1 Inadmissible types of garage door ...... 49
8. Functional description ...............................50
8.1 Brief description of the
convenience functions ........................ 50
8.2 Functional description /
emergency release ..............................51
8.3 Functional description /
obstacle detection ..............................51
8.4 Monthly checks on the obstacle
detection system (power limiting) ......52
9. Maintenance ...............................52
10. Important assembly instructions ...................53
10.1 Required tools ...............................54
10.2 Remove the door locks ........................54
10.3 Take measurements ............................ 55
10.4 Assembly of the rails ...........................56
10.5 Tension the toothed belt .....................56
10.6 Connect the door drive housing
to the rail ...............................57
10.7 Connect the door drive housing to
the rail (90° drive assembling) ............58
10.8 Attachment of the drive and rail ......... 59
10.9 (A) Installation of the header
bracket (1) ............................... 60
10.10 (B) Installation of the fixing
bracket (5) at the drive head (7) .........60
10.11 (C) Installation of the door
bracket (8) ............................... 61
10.12 (D) Installation of the middle
support clip (13) 62
10.13 Important notes after installation .......63
10.14 Attach safety notices with warning
information ...............................63
10.15 Establish operational readiness of
the door ...............................63
11. Programming ...............................63
11.1 Setting end points / setting the
upper end point ...............................64
11.2 Setting the lower end point ................ 64
11.3 Carry out reference run for power
measurement ............................... 65
11.4 Adjust power limiting as required ....... 66
11.5 Alarm setting ...............................67
11.6 Automatic closing time setting ..........67
11.7 2000 cycle alarm setting .....................68
11.8 Opening speed setting ........................69
11.9 Back-jump function setting ................70
11.10 Conclude programming ...................... 71
12. Logging on/off manual transmitters and
DuoFern HomePilot® ............................... 72
13. Application and installation of light
barrier ...............................73
14. Connecting additional electrical equipment ..73
14.1 Connection diagram for additional
electrical equipment ...........................74
15. Manual door operation ............................... 75
16. Instructions for the user ...............................76
17. Technical Specifications ...............................77
17.1 Permitted garage door dimensions .....77
18. Troubleshooting ...............................78
19. Simplified EU Declaration of Conformity ........79
20. Environmentally compatible disposal ............79
21. Warranty conditions ............................... 80