Instructions

95
EN
19.6 Menu 9.6 - Conguration of blockage detection [ ]
3.
Select and conrm the
suitable motor type.
In order to do so, please
refer to the operating
manual for the respective
tubular motor.
Motor types
Diameter / Power
1
06 35 mm / 6 Nm
1 10 35 mm / up to 10 Nm
2 10 45 mm / up to 10 Nm
2 20 45 mm / up to 20 Nm
2 30 45 mm / up to 30 Nm
2 40 45 mm / up to 40 Nm
2 50 45 mm / up to 50 Nm
4.
Set and conrm the
sensitivity level.
Sensitivity:
1 = low
6 = high
If the installed motor type is
unknown, please select:
1
06 for roller shutters with
an area up to 1.5 m
2
230 for larger roller shutters
NOTE
◆ Test runs should be made to ascertain the highest possible
level of sensitivity, in order to protect the roller shutters in
the event of blockage.
◆ It may be necessary to customise the cut-o sensitivity
depending on the properties of the roller shutters (weight,
running characteristics, etc.).