Instructions

88
EN
19.2 Menu 9.2 - Congure motor running time
1.
Select and open menu
9.2 motor running
time.
2.
Press and hold the
[ Down ]-button...
5.
Back to system menu.
e.g. 15 sec.
...until the roller shutters
stop at the lower end
point.
3.
Press and hold the
[ Up ]-button...
...until the roller shutters
stop at the upper end
point.
4.
Release the [ Up ]-key.
Manually setting the
running time
a)
Fully close the roller
shutters.
b)
Subsequently move the
roller shutters to the
upper end point and
make a note of the time
required.
c)
Enter and conrm the
measured running time
in menu 9.2.
The running time will be timed
and stored during the up cycle.