Instructions

81
EN
18.10 Automatic wind function [ ]; brief description
This function enables you to use the Troll Comfort DuoFern to
operate, for example, connected Venetian blinds in relation to
the weather conditions.
As soon as an external “wind” signal transducer, the control signal
can be transferred to the Troll Comfort DuoFern in the DuoFern
network or via one of the correspondingly congured inputs (E1
or E2). `
Conguration of inputs E1 / E2
see page 104, menu 9.8.6
The direction of rotation in the event of wind can be
congured.
The wind can be used to retract the Venetian blinds or close them
as a draught stop.
If the automatic wind function is active ...
◆ the [
] icon ashes.
◆ Manual operation is no longer possible.
◆ Automatic movement commands are no longer carried
out but will be resumed as soon as the wind subsides. In
each case, only the last automatic movement command is
subsequently executed.
NOTE
◆ In manual mode, the automatic wind function remains
active, for example, in order to keep an awning protected
from wind at all times.
◆ If the direction of rotation for wind is set to DOWN and wind
is detected when the drive is at the upper end position, then
the drive moves back to the upper end position as soon as
no more wind is detected.