Instructions

68
[ 1 ]
EN
18.5.3 Dismantling the light sensor [6].
1. Carefully pull the operating unit [ 1 ] away from the installation
housing [ 3 ].
2. If the sensor cable has been xed in place by means of the operat-
ing unit’s [ 1 ] engagement hooks, then it must rst be released,
for example, with the help of a 50 cent coin.
3. Pull the light sensor plug [ 6 ] out of the socket [ 7 ].
4. Replace the operating unit [ 1 ] back onto the installation
housing [ 3 ].
i