Instructions

66
i
EN
18.5.2 Light sensor connection when using a frame supplied by a third-party manufacturer.
1. Carefully pull the operating unit [ 1 ] away from the installation
housing [ 3 ].
2. Insert the light sensor plug [ 6 ] into the socket [ 7 ] on the rear
of the operating unit [ 1 ].
3. Lay the sensor cable in the cable bushing of the operating unit.
The sensor cable can be pressed into the engagement hooks
with the help of a rounded object (for example, a 50 cent coin).
4. Carefully replace the operating unit [ 1 ] together with the frame
back onto the installation housing [ 3 ].
Engagement
hooks