Instructions

64
EN
INFORMATION ABOUT THE  ASTRO  SWITCHING TIME
MODE
◆ If [ ASTRO ] is selected as the switching time mode, the
calculated darkness time can be individually customised by
means of an oset between –60 and +60 minutes.
■ Dusk can be congured in menu 3, see page 69.
■ Dawn can be congured in menu 5, see page 78.
18.4 Menu 2 - Conguration of opening and closing times [ / ]
18.5 Connecting a local light sensor [ 6 ]
If you intend to operate your Troll Comfort DuoFern and the connect-
ed tubular motor according to brightness levels, then you must con-
nect the optionally available RADEMACHER light sensor [ 6 ] to the
Troll Comfort DuoFern.
If the Troll Comfort DuoFern is intended to react to control signals
from a central sun shading controller within the DuoFern
network (e.g. a DuoFern radio sun sensor), then it is not necessary
to connect the local light sensor [ 6 ].
INFORMATION ABOUT THE  SENSOR SWITCHING TIME
MODE
◆ If [SENSOR] is selected as the switching time mode, then
the desired twilight limit value can be congured in
menu 3, see page 69 .