Instructions

57
EN
Double the amount of switching times by activating a
second switching time block:
If necessary you can double the amount of available opening
and closing times. In order to do so, a second switching time
block (n = 2) must be activated in menu 9.5 [
], see page 92.
IMPORTANT
If a second switching time block has been activated [ n 2 ], you
can select the desired switching time block (1,2) prior to setting
the opening and closing times.
NOTE
The switching times in the second switching time block [ 2 ]
cannot be linked to a switching time mode [ NORMAL /
ASTRO / SENSOR ].
Application example for a second switching time.
You can use a second switching time, for example, to darken a
child’s bedroom at midday:
– The rst opening time has been set to 8:00 hours.
– The roller shutters will open at 8:00 a.m.
– The roller shutters should close again at 12:00 hours
and open again at 14:30 hours.
– In order to do so, a second switching time block must
be selected and the appropriate second opening and
closing time must be set.
– The rst closing time was set to 20:00 hours.
– The roller shutters close at 20:00 hours.
18.3 Switching times (opening and closing times) [ / ]; brief description