Instructions

51
EN
17.4 Menu 9.9.4 - Switch weather data on/o
This menu enables you to switch the weather data display on and
o. If numerous environmental sensors are being received, then
you can additionally select the desired environmental sensor.
NOTE
Environmental sensors update the weather data approx. every
5 minutes. For this reason, it can take a few minutes until the
weather data is displayed.
1.
Select and open menu
9.9.4 weather data.
2.
Switch the weather data
display on [ On ] or off
[ OFF ].
a)
After switching on, the
DuoFern address of the
respective environmen-
tal sensor is displayed.
The last four digits are
displayed.
3.
Select and conrm the
desired environmental
sensor.
Display if no environmental
sensor is detected.